Figure 8
Page 11
Installation (Continued)
Connect the range hood to a designated standard outlet (please re-7.
fer the product label for the suitable voltage of this unit) or cut off
the plug and connect three wires (black, white and green) to house
wires and cap with wire connectors. Connect according to colors
(i.e. black to black, white to white, and green to green) as shown in
Figure 6.
Store excess wires in the wiring box.8.
Install both chimneys and tighten screws to secure the lower chim-9.
ney to the range hood as shown in Figure 8.
To avoid scratching the chimney, extend the upper chimney 10. slowly
and carefully to the chimney-mounting bracket and tigten screws
as shown in Figure 9.
To install bafe lters, refer to Figure 10 for the following three 11.
steps:
Angle bafe lter toward back of hood.
Slide the knob toward the metal lter handle and push up.
Release the knob until it ts into resting positions.
Repeat Step 12 to install all bafe lters.12.
Turn powe ON in control panel. Check all lights and fan operations.13.
Make sure to leave this Installation Guide for the homeowner.14.
Figure 9
Figure 10
Commentaires sur ces manuels